Safety requirements for shears

Shearing machine shears should be able to ensure the cutting sheet material shear straightness and parallelism requirements, and minimize the sheet distortion, in order to obtain high-quality mechanical Jianban. The upper blade of the shearing machine is fixed on the knife holder, and the lower blade is fixed on the worktable. The table is equipped with a care ball, so that the slide in the top of the sheet is not scratched. The backstop is used for positioning the blank and the position is adjusted by the motor. The crimper is used to press the blank to prevent the blank from moving during shearing. Guard rails are safety devices to prevent accidents at work. Return generally rely on nitrogen, fast, small impact.

Shearing machine operating procedures Safety motor, foot switch surface should be clean, the surrounding does not allow other objects. Table, scissors, equipment, link does not allow any object, or boot must be cleared before. In the handling of the material handling staff must rational use of labor insurance products, to avoid scratching hands and feet. Wear protective goggles when cutting aluminum. Shear barrier, shall not be arbitrarily removed. After the equipment is repaired, all safety devices can be installed before production. Operating procedures Check the boot before the inspection of various parts of the shearing device and components are solid and reliable, or should be adjusted. Check the equipment and power switch, foot clutch, brake, etc. are normal.